連杆體、連杆蓋、軸承蓋拉床

連杆體 、連杆蓋、軸承蓋的加工

Broaching of connecting rod shaft,connecting rod cap,bearing cap

連杆是拉削工藝較為 典型的零件，其拉削部位包括：連杆體 、連杆蓋結合麵、軸承蓋、半圓孔麵及外部形體 的拉削，用戶對我們 的產 品要求：

一、更高的在線工作可靠性，

二、可靠的精度保障，

三、降低維護保養 費用及刀具成本。

四、高工效

為 此，我們 設計時采用了固定式工作台、翻轉工作台、回轉工作台或移動式工作台結構，並可配置自動上下料機構。為 進—步確保可靠性，所有控製元件均采用優 質可靠的品牌產 品，較好地達到了用戶要求。

機床主要參數：

切削力：100KN-200KN

機床行程：1600mm-2500m

Broaching of connecting rod shaft ∞nnecting rod cap. bearing cap connecting rod shaft is one of typical parts in broaching tecnique.The broaching parts indude: connecting plane of connecting rod shaftand cap.  bearing cap. surface of semicirde bore and external parts.

The users usually have following

demands:

1 .More reliable when working.

2. Reliable accuracy.

3. Reduce cost of maintaining and cost of tools.

4. High effciency.

For this reason, we adopt fixed worktable, rotary worktable and movable worktable to make loading, unloading and broaching superposition. All the electric components are famous brand in order to guarantee the reliability and meet the demand of users. Main specification

Cutting force: 100KN-200KN

Stroke: 1600mm-2500mm